Generation 3 Silicone Orthodontic Bottle Nipple - 2pcs

Small

£10.99 GBP

Generation 3 Silicone Orthodontic Bottle Nipple - 2pcs

3 left

Generation 3 Silicone Orthodontic Bottle Nipple - 2pcs

£10.99 GBP

Taxes included. Shipping calculated at checkout.

The Silicone Orthodontic Bottle Nipple attachment is fully compatible with all Gen. 3 bottles (glass and silicone) and storage containers, transforming them into a handy baby bottle!

Our Orthodontic Bottle Nipple is designed to provide the most natural feeding experience possible for you and your baby. The orthodontic thumb-shaped teat mimics the shape of a mother's nipple during breastfeeding, and the offset position allows you to safely feed your baby without completely inverting your bottle. The anti-colic vent allows your baby to feed continuously without taking in air bubbles or having to gasp for air between latches.

Features

Fully compatible with all Gen. 3 Baby Bottles.
Anti-colic vents allow your baby to drink continuously without gasping for air or drinking bubbles.
Soft, naturally-shaped orthodontic teat mimics the shape of a mother's nipple during breastfeeding.
Made of 100% medical-grade silicone.
BPA, PVC and phthalate-free.
Safe in freezers microwave sterilisers and boiling water.

Cleaning & Care

Clean after each use. Although dishwasher safe, we recommend hand washing in warm soapy water and rinsing and drying thoroughly. Do not use bleach-based cleaners or tablets to sterilise this product. This bottle can be sterilised with any steam sterilising system or by boiling in water for 2-3 minutes.

We recommend replacing your bottle teats every two months, or earlier if you spot any signs of weakness or damage. Make sure to check for damage every time you use your bottle, especially if your baby has teeth.

Caution

Check product condition regularly. Replace if this product shows any signs of damage. Do not store near any sharp objects. Only soft bristle brushes or soft sponges should be used to clean this product. Hard scourers may scratch the surface. This product is not a toy. Do not use this product for anything other than its intended use. Store product in a cool, dry place and avoid direct sunlight. Adult supervision is required.

Instructions for use

View our Product Manual

Related products

Frequently asked questions

Before using a Haakaa pump, it is recommended to sterilise it by boiling in water for 2-3 mins (if you have a steam steriliser, you can use this if you prefer).
Place the pump flange over your nipple - make sure your nipple is centred comfortably in the neck of the pump. You can either fold the flange back and push the body of the pump to achieve a stronger suction or just push the air out by squeezing the pump's body without folding the flange back to get a lighter suction. Remember, the more air you squeeze out, the stronger the suction.
Apply suction - you may need to adjust the position of your pump a couple of times. Once the pump is secure and comfortable, apply suction by squeezing the base of the pump to start the flow of the milk. Once milk starts to flow, leave the pump alone to do its thing.
If milk flow slows down or you have expressed your desired amount, detach the pump from your breast and safely store your milk.

The Haakaa Silicone Breast Pump was originally designed as a manual pump for mums, but can also be used as a tool to catch letdown. When we breastfeed from one side, we generally have a letdown from the breast on the opposite side - though this milk is often wasted through leakage into a breast pad or in your bra. Haakaa pumps are perfect for capturing your leakage, ensuring it doesn’t go to waste. Simply pop on your pump at the beginning of a feed for a few mins to catch your precious liquid gold! Once your initial letdown has slowed, you can then remove your pump. You will likely capture mainly foremilk in these first few minutes (which is 100% fine!). If you want to use the pump to empty your breast, simply leave it on until the breast is drained to get both fore and hindmilk (usually about 10-12 mins).

1. Relieves engorged and uncomfortable breasts
2. Builds a breastmilk stash
3. Fantastic on-the-go pumping option
4. No electricity or charging needed
5. Easy to clean
6. Catches letdown
7. Pain-free if applied correctly
8. One-piece silicone

There can be different reasons for this. A low milk supply can result from not pumping enough, pumping too soon after a feeding session or skipping a feed. You may also have a low supply if you're using a suction level that is not suitable or comfortable for you or even if you simply require more hydration throughout the day. Being stressed or under pressure can also affect your supply or the amount you express in a session.

We strongly recommend cleaning your Haakaa pump with warm, soapy water and then sterilising it with any steam sterilising system or by boiling in water for 2-3 mins. Do not use any bleach-based agents or sterilising tablets to clean this product, as this could affect the lifespan of the pump. It is also not recommended to use UV sterilisers to clean the pump, as they may impact the lifespan of your pump as well.

Account

Your cart is empty